chilled cast iron
英 [tʃɪld kɑːst ˈaɪən]
美 [tʃɪld kæst ˈaɪərn]
冷硬铸铁
双语例句
- Formation Mechanism and Prevention of "Black Line" in Section of Chilled Cast Iron Camshaft
激冷铸铁凸轮轴黑线的形成机理及对策 - Chilled cast iron roller, apply to rubber, plastics industry, the compatibility-aligning bearings, flexible durable.
冷硬铸铁辊筒，适用于橡胶、塑料工业、配装调心轴承，灵活耐用、省电、减少维修。 - Effect of microstructure on thermal fatigue properties of infinite chilled cast iron roll materials
显微组织对无限冷硬铸铁轧辊热疲劳性能的影响 - The wear resistance of chilled cast iron cams with different graphite contents in the chilled layer were studied through wear contrast test.
采用磨损对比试验，研究了激冷层中不同石墨含量激冷铸铁凸轮之间的耐磨性关系。 - Influence of Te and Nb on Structure and Properties of Chilled Cast Iron Roll
Te和Nb对冷硬铸铁轧辊组织和性能的影响 - This type of tips has presented a good wear resistance equal to that of typical cemented carbides YG6 tips when cutting austenitic stainless steel, nodular cast iron and chilled cast iron.
结果表明，该刀片在车削奥氏体不锈钢、球磨铸铁和冷硬铸铁时，其耐磨性较好，与常规工艺生产的YG6刀片相当。 - The effect of Nb on structure at elevated temperature and phase transformation temperature of chilled cast iron was studied in this paper.
采用高温金相显微镜研究了含铌冷硬铸铁高温的金相组织，差热分析仪测定了铌对冷硬铸铁固态相变温度的影响。 - The wear behavior of Si 3N 4 ceramic in dry sliding against chilled cast iron was investigated on a block on disc friction and wear tester.
采用块-盘摩擦磨损试验机考察了陶瓷与冷激铸铁在干摩擦条件下的摩擦磨损行为。 - Production Technique of Low Alloy Chilled Cast Iron Camshaft
低合金冷激铸铁凸轮轴的生产技术 - Analysis on the Wear Performance of Si_3N_4 Ceramic and Chilled Cast Iron Under Unlubricated Condition
Si3N4陶瓷-白口铸铁在无润滑条件下的磨损性能分析 - The Wear Failure Analysis of Chilled Cast Iron Tappet
冷激铸铁挺杆的磨损失效分析 - Research on Pitting Mechanism of a Chilled Cast Iron Cam
冷激铸铁凸轮点蚀机理的研究 - Chilled cast iron camshaft has less production procedure and energy consumption and lower costs.
冷硬铸铁凸轮轴具有生产工序少、能耗少、成本低的特点。 - In this paper, the main factors affecting the chill depth of chilled cast iron roll were discussed.
本文探讨了影响冷硬铸铁轧辊白口层深度的主要因素。 - Tempering Transformation of Mo dified Infinitely Chilled Cast Iron Roll
改进型无限冷硬铸铁轧辊回火组织转变研究 - Surface Quality of Cut Chilled Cast Iron Rolls
车削冷硬铸铁轧辊的表面质量 - Applying shell molding process to produce chilled cast iron, castings with low surface roughness and high size accuracy can be obtained and the castings can satisfy French PSA chilled cast iron standard.
该凸轮轴采用壳型铸造冷硬铸铁工艺方法，铸件表面粗糙度低、尺寸精度高，铸件材质性能满足法国PSA集团冷硬铸铁技术标准。 - Production and Application of Fully Chilled Cast Iron Camshaft with High Properties
高性能全激冷铸铁凸轮轴的生产和应用 - The Microstructure and Wear Resistance of the Chilled Cast Iron After Heat-Treat
激冷铸铁热处理后的显微组织与耐磨性 - Foundry Technique and Control of Chilled Cast Iron Camshafts
冷硬铸铁凸轮轴铸造技术与控制 - Effect of Graphite Content in Chilled Layer on Wear Resistance of Chilled Cast Iron Cams
激冷铸铁凸轮激冷层中的石墨对耐磨性的影响 - The Chilled Cast Iron Rolls Cut Off and Its Cutter Design
冷硬铸铁轧辊的切断及切断刀的设计 - Influence of Process Factors Stability on Quality of Chilled Cast Iron Camshaft
工艺因素稳定性对冷硬铸铁凸轮轴质量的影响 - Analyses the weldability of chilled cast iron and introduces the chemical composition and metallurgical characteristics of the two kinds of special electrodes for it.
对白口铸铁可焊性进行了分析，重点介绍了两种特殊专用焊条的成分与冶金特点。 - Experiments on creep gridding technology for alloy chilled cast iron earn shaft Mixed gridding technology is applied at gridding drawing process, and the gridding of small structure is minished.
合金冷激铸铁凸轮轴强力磨削工艺试验研究在划分计算网格时，采用了混合网格生成技术，并对细小的结构进行了网格的局部细化。 - Alloying Effect of Vanadium and Titanium in Chilled Cast Iron Roller
钒钛合金冷硬铸铁轧辊试验研究 - The influences of quench and temper treatment on the microstructure and wear resistance of white layer of the chilled cast iron were discussed.
探讨了淬火及回火热处理对激冷铸铁白口层的显微组织与耐磨性的影响。 - The results show that Nb can increase the structure stability of chilled cast iron.
结果表明，铌可以有效地提高冷硬铸铁高温组织的稳定性。 - It is an advanced way by now to manufacture engine camshafts by using low alloy chilled cast iron.
采用低合金冷激铸铁制造发动机凸轮轴是目前比较先进的工艺。